Add a wireless repeater
Wireless repeaters extend your cordless network range without requiring you to include any electrical wiring. Simply place the wireless repeater midway in between your cordless router 2017, modem router, or access point and your computer system, and you can get an immediate increase to your wireless signal strength.
Change your wireless channel
Wireless routers can transmit on a number of different channels, much like the way radio stations utilize various channels. In the United States and Canada, these channels are 1, 6, and 11. Simply as you’ll sometimes hear disturbance on one radio station while another is completely clear, sometimes one cordless channel is clearer than others. Attempt changing your wireless router’s channel through your router’s configuration page to see if your signal strength enhances. You do not need to change your computer’s setup, due to the fact that it can instantly spot the new channel.
Minimize cordless interference
The most typical wireless innovation, 802.11 g (wireless-G), operates at a frequency of 2.4 gigahertz (GHz). Lots of cordless phones, microwave, child screens, garage door openers, and other cordless electronic devices likewise use this frequency. If you use these wireless gadgets in your house, your computer may not be able to “hear” your router over the sound originating from them.
If your network uses wireless-G, you can peaceful the noise by avoiding wireless electronic devices that utilize the 2.4 GHz frequency. Rather, try to find cordless phones and other gadgets that utilize the 5.8 GHz or 900 megahertz (MHz) frequencies. Since 802.11 n (wireless-N) runs at both 2.4 GHz and the less regularly utilized 5.0 GHz frequency, you might experience less disturbance on your network if you use this technology.
Update your firmware or your network adapter driver
Router producers routinely make complimentary enhancements to their routers. Sometimes, these improvements increase performance. To obtain the latest firmware updates for your Cisco router, see Cisco.com.
Similarly, network adapter suppliers sometimes upgrade the software that Windows utilizes to communicate with your network adapter, known as the driver. These updates typically enhance efficiency and dependability.
Select devices from a single vendor
Although a Cisco router will deal with a D-Link network adapter, you often get better performance if you choose a router and network adapter from the very same supplier. Some vendors provide an efficiency increase of approximately two times the performance when you select their hardware (like their USB cordless network adapters).
If speeding up your connection is important to you, think about the next tip– updating your wireless technology.
Update 802.11 a, 802.11 b, and 802.11 g devices to 802.11 n.
Although wireless-G (802.11 g) may be the most typical type of wireless network, wireless-N (802.11 n) is at least twice as fast and it has much better variety and stability. Wireless-N is backward-compatible with 802.11 a, 802.11 b, and 802.11 g, so you can still utilize any existing cordless equipment that you have– though you will not see much enhancement in performance up until you upgrade your computer or network adapter to wireless-G, too.
If you’re using wireless-B or wireless-G and you’re dissatisfied with your network’s speed and performance, think about changing your router and network adapters with wireless-N equipment. If you’re purchasing brand-new equipment, definitely select wireless-N. Cisco Wireless-N routers, for instance, are effective, safe and secure, and basic to establish.